Two Power Wheelchairs, Two Customers: A Distributor’s Shortlist

Stocking two models is not a compromise. It is a coverage decision, and it only works if the two are split by how the chair is handled — not by price, and not by colour.

Split them the other way and you end up with two chairs chasing the same buyer, a showroom that can demo neither properly, and a parts shelf holding two of everything.

Here is the split we run through with distributors before a first order, and the four checks that decide whether either model earns its place.

The split: one chair gets lifted, one chair never leaves the house

Lane A — goes in the car Lane B — stays on the ground floor
Customer Drives a sedan or hatchback, travels weekly, lifts the chair alone or with one helper 100–150 kg user, never lifts the chair, needs stability outdoors and a wide seat
What decides the sale As-lifted weight, folded envelope, one-person fold Seat width, load rating, wheel size, replacement cost
Spec that fails the demo Folded height vs. boot lip Overall width vs. bathroom door
Model that fits today VR-C1 — 11.6 kg frame, 460 mm overall width, folds to 730 × 280 × 715 mm, 136 kg capacity, 900 mm turning radius VR-B1 — 150 kg capacity, 500 mm seat, 24-inch rear wheels
Where it breaks Carbon frame and a 280 mm folded width: premium cost, and the 455 mm seat is narrow for a large user 26 kg and a lead-acid battery: it will not be lifted, and the battery is a service item

Why not the lightest chair in the range? VR-F1 is quoted at 9.8 kg and folds to 640 × 410 × 510 mm — smaller in every direction than C1. But 9.8 kg is a frame-only figure, and against C1’s 11.6 kg frame the real gap is 1.8 kg. For those 1.8 kg you give up 36 kg of load rating, the 11-inch rear wheels and the 455 mm seat. Keep F1 for the customer who actually flies with the chair; it is a special order, not a stock line.

“Can I lift it into my car?”

There are three weights, and most catalogues print one.

Weight VR-C1 What it decides
Frame, no battery 11.6 kg The number in the brochure. Nobody lifts only this.
Battery, as you ship it ≈ 2 kg (lithium) Rarely printed. This is the number that breaks the lift.
As lifted, in one trip ≈ 13.6 kg The only number the car park cares about.

Every lithium chair in our range takes a detachable battery, and that single design detail decides whether a chair belongs in Lane A at all:

  • With the battery off, the lift becomes two trips — frame first at 11.6 kg, battery second at ≈ 2 kg. The heaviest single object is 11.6 kg, which is a one-person lift for most adults.
  • If a supplier’s battery is fixed, the heaviest object is the frame plus the battery, and the chair has quietly moved out of Lane A no matter what the brochure says.

So the question to put to any supplier is not “how much does it weigh” but “does the battery detach, and what does it weigh on its own”. Get both answers in writing before the deposit, not after the container — a 2 kg battery and an 8 kg battery are both “a lithium battery” on a spec sheet, and only one of them leaves the boot liftable.

Folded envelope, measured at the boot lip. A boot’s usable height is at the lip, not the floor, and the lip is where a 715 mm folded chair stops fitting even though the boot floor has room. Publish three folded numbers in the order length × width × height, and state the battery state on the same line: C1 folds to 730 × 280 × 715 mm with the battery removed.

Film the fold, don’t describe it. One continuous take, battery in, from standing to fully folded, counting the seconds and the hands. If it takes two people, say so in the video — a distributor who discovers that in front of a customer loses the customer, not the sale.

Ask the lifting question in the second person. Not “can it be lifted” but “can a 60 kg spouse lift it into a hatchback without lifting technique”. If the answer is no, that chair belongs in Lane B and should be sold with a ramp, not with a boot photo.

“Will it fit through my doorway?”

Three numbers decide this, and the middle one is usually missing from the catalogue.

Number Why it matters Where it bites
Overall width The only number that physically passes through the frame VR-C1 460 mm · measure every other model on the sample
Seat width Comfort, and what the customer judges in the showroom VR-C1 455 mm · VR-B1 500 mm · VR-A1 440 mm
Turning radius Whether the chair can turn into the room after it enters VR-C1 900 mm · VR-L1 830 mm

Seat width is not doorway width. On most chairs a 455 mm seat sits inside a 550–650 mm overall width once armrests and wheels are counted. VR-C1 is the exception in our range: 455 mm seat, 460 mm overall. That 90–190 mm difference is what separates an 800 mm hallway door from a 700 mm bathroom door, and it is why quoting the seat tells your customer nothing about whether the chair goes in.

The turn, not the door. The failure is almost never the straight approach — it is the 90° turn from a hallway into a bathroom door. With a 900 mm turning radius, an 800 mm door on a narrow hallway leaves no room to swing. Ask for the hallway width and the door width together, and draw the turn on paper before quoting.

Thresholds and castors. A 20–40 mm bathroom threshold stops a 6-inch castor far more reliably than it stops an 11-inch wheel. This is the single most common return reason on Lane A chairs, and it is invisible in every product photo.

Do not print a door-width claim until you have measured the sample. We publish overall width only where the factory sheet gives it; where it is missing, we say so rather than estimate.

Can you make money at your local retail price?

Work backwards. Start from the price your market will actually pay, subtract the margin you need, and see what landed cost survives — including a warranty reserve.

Your retail (ex-VAT) 40% gross margin 45% gross margin 50% gross margin
€899 max landed €518 max landed €475 max landed €432
€1,290 max landed €743 max landed €681 max landed €619
€1,790 max landed €1,031 max landed €945 max landed €859

Figures include a 4% warranty reserve per unit. Max landed cost = retail × (1 − margin) × 0.96.

Two things follow from that table:

  • A carbon-fibre chair rarely survives a €899 retail price. At €899 and a 45% margin you have €475 of landed cost for a chair, a battery, freight, duty and clearance. That is Lane B money.
  • The margin you quote your dealers is not the margin you keep. If you sell through dealers at 35–40% off retail, your own gross margin on a €1,290 chair is closer to 20% before service — which means the landed cost target in the table moves down, not up.

Add the cost that never appears in a quote: one dead chair in twenty, replaced or repaired in warranty, is a 5% hit on every unit you sold. And freight is the other number that moves the table — the shipping rules for lithium wheelchairs decide whether you book sea or air, and by how much.

Can you repair the units you sell?

This is the check that separates a catalogue from a business, and it is the one suppliers answer worst.

Ask for part numbers, unit prices and lead times for the parts that actually fail on the exact model you are ordering:

  • joystick / controller (the single most expensive part, and the most model-specific)
  • charger
  • battery — and whether the connector is proprietary
  • front castor and rear tyre
  • footplate and armrest pad
  • motor brushes or the complete motor

Ask three questions about each: price at 1 / 10 / 50 pieces, lead time from order, and is this part shared with another model in your range. A shared part halves your shelf; a proprietary connector locks you to one supplier.

Put one spare joystick and one charger per 20 units in the first order. A €40 part with a six-week lead time is a customer sitting in a dead chair for six weeks, and a dealer who will not reorder.

Lead-acid is a business decision, not a spec. VR-B1 ships a 24 V 12 Ah lead-acid battery. That is a repeat revenue line and a heavier chair — tell the customer the replacement cycle up front and you keep the account; let them discover it and you lose it.

One compliance line that is not optional

In the EU, the distributor who places the product on the market carries importer obligations. Before the first shipment, confirm three things and keep the paperwork on file:

  1. The Declaration of Conformity names the exact model — not the platform, not the series.
  2. The DoC references EN 12184 for the power wheelchair and UN 38.3 for the lithium battery.
  3. Your company appears as the importer on the label and in the technical file.

If a supplier sends a DoC for a different model in the same family, that is not a paperwork delay. It is a product you cannot legally sell.

Two models, four checks, one shortlist

Send us the market you sell into, the retail price you need to hit, and the question your customers ask most often. We will come back with two models — one for the buyer who lifts, one for the buyer who does not — and the four checks above already run against the factories behind them.

RJK MOBILITY sources power wheelchairs from Chinese factories for importers and distributors. We do not make the chairs; we compare them, quote them, and stay on the file when a part is needed. The sourcing service page sets out how the comparison and the first order work.

← Blog

Leave a Reply

Your email address will not be published. Required fields are marked *

Related reading

Chat on WhatsApp